Where To Start with Coolants and More

How to Choose the Right Coolant for Your Truck It is advisable to use the right coolant to ensure your vehicle engine stays in great condition. However, the coolants suitable for trucks may not be the same as those used for small vehicles. Tracks usually haul larger loads such as boats, campers and trailers and given the power they produce, it is logical that their coolant requirements will be different. To find the right truck coolant to buy, it is important to research well. You can ensure your engine won’t overheat or get damaged by using the right coolant. Which Coolant Should You Use? There are various types of engine coolants or antifreeze you can buy for your truck. Ethylene glycol and propylene glycol are the most common compounds used as truck coolants. Keep in mind that ethylene glycol is very toxic and should be handled with extreme care. The compound should not be allowed to drain into the water table. Most truckers use propylene glycol as a coolant since it is safer and recommended by the national authorities. The compound is used in all types of coolants including aircraft de-icing, toiletries and foods. However, you should not allow it to drain into the water table, just like is the case with ethylene glycol.
The 10 Most Unanswered Questions about Resources
The general rule of thumb is that the engine coolant and water should be mixed in a 50/50 ratio. The mixture should not have less than 40 percent of water. Majority of people know that the coolant’s work is to keep the engine from freezing. While this is one of the functions, it is not the main one. The engine mixture ensure the freezing point stays low while the boiling point stays high. This is the main reason for using a coolant. The engine cylinder wall can rust, get corroded or cavities if you do not use the right coolant. Your engine may die due to these occurrences.
How I Became An Expert on Vehicles
Monitor the Freezing Point If you live in an area that is usually cold, you should keep the concentration of propylene glycol high. The reason for this is due to the inefficiency of the compound in lowering the freezing point.This is because the compound is not efficient in lowering the freezing point. If you live in a warm climate area, you will realize that propylene glycol transfers heat fast. This is why the compound is great if you will be hauling large loads on uneven terrains. Making the Right Mixture You should never dilute concentrated engine coolant with water from a faucet. Scaling of the engine usually results when you use tap water to dilute the coolant. The engine coolant should be diluted with distilled or de-ionized water. Most manufacturers advise truckers to purchase pre-diluted coolant. You need to do your research well to find the right coolant for your truck. The above are some tips that will help you find the right coolant.